Lab-7– Revit –Times and Locations

Location

This week’s lab will again be located in the CAEE CadLab in CAT-167.  It’s on the ground floor in the Southeast corner of the building.  CAT is the building to the North of Ludlow (where the food trucks are located)  - Link to Google Maps

 

Familiarity – Email to Skip Lab Session

If you are already competent with Revit you may send me an email (James.Mitchell@Drexel.edu) BEFORE the lab time saying you know Revit and don’t need to attend the lab.  I’ll mark you present for the lab.

Times

Because there are only a limited number of computers in the lab we’re splitting each section in half, so each comes for only 1 hour.  You may exchange with a student from another section, but except as noted below please do not come at a time different than the one to which you’re assigned.

Note that section 061 is much bigger than Section 060 so some students from 061 may come to the 060 times with a reasonable chance of finding a place.  Those officially in the section will have priority if we exceed the capacity of the room.

Section 060 10:00-12:00

• A-L  10:00
• M-Z  11:00

Section 061 12:00-2:00

• A-K  12:00
• L-Z 1:00

 

Revit

We’ll be using the program Revit in the lab.  You’re welcome to download it for your laptop for free from http://students.autodesk.com.

• It’s a 3GB download and a 5GB Install
• You’ll need to register with Autodesk
• It’s for Windows Machines only
• Be aware you’ll need to copy the files you create in the lab to yourself via thumbdrive, email, DropBox or something similar.  Your files will probably be erased from the machines.
• Also be aware that files created in a newer version of Revit are NOT openable in older versions.